Shop drawings · CSI Division 10
Division 10 specialties, laid out and mounted.
Shop drawings for Division 10 specialty contractors, with toilet partitions laid out, accessories placed on mounting elevations, and lockers, signage and wall protection located.
- Toilet partition layouts
- Accessory mounting elevations
- Locker layouts
What you receive
A drawing set ready for your submittal.
Drafted in AutoCAD and Revit, with anything the contract drawings leave open listed for your RFIs.
- 01
PDF set for submittal
- 02
Native DWG or RVT files
- 03
Imperial or metric units
Drawing set
What the set includes.
The sheets in a typical set of specialties shop drawings. The exact list follows your contract drawings and specification section.
Sheet
What it shows
- Toilet partition layoutsCompartment sizes, doors, pilasters and urinal screens, with clearances.
- Accessory mounting elevationsGrab bars, dispensers, mirrors and shelves at their mounting heights.
- Locker layoutsLocker banks, bases, benches and end panels.
- Signage location plansEach sign by type and location, with the sign schedule.
- Wall protection plansCorner guards, crash rails and wall panels.
- Fire extinguisher cabinet plansCabinets and brackets by location and type.
Method
How we prepare specialties shop drawings.
Mounting heights and clearances come from the architectural drawings and are noted on each elevation.
Backing locations are shown, so the framing contractor can install blocking before the board goes up.
Accessories are tagged to the accessory schedule.
Items supplied by the owner are marked as such.
Standards
The references your reviewer expects.
We draft to the standards your contract drawings and specification cite. These are the ones we see most often for this trade.
2010 ADA Standards and ICC A117.1
Accessible mounting heights and clearances on US projects, as shown on the architectural drawings.
CSA B651
Accessible design for the built environment in Canada.
Deliverables
What every set includes.
- PDF drawing set, ready for your submittal
- Native files: DWG from AutoCAD or RVT from Revit
- A list of open questions and conflicts, for you to raise as RFIs
- Revisions to the reviewer's comments, recorded in the title block
- Imperial or metric units, to match the contract drawings
- Drafted in AutoCAD and Revit
Who it is for
- Division 10 specialty contractors
- Toilet partition installers
- Signage contractors
- General contractors
Related
Shop drawings for the trades next to yours.
Questions contractors ask us
Do you show mounting heights?
Do you show where backing goes?
Do you estimate specialties too?
Are the shop drawings stamped?
How are shop drawings priced?
Division 10 Specialties shop drawings
Submittal due soon? Send the contract set.
Send the contract drawings, the specification section and the submittal date, and we will quote the specialties shop drawings.
