Shop drawings · CSI Division 26

Electrical shop drawings, from slab conduit to panel schedule.

Electrical shop drawings for electrical contractors, with conduit, cable tray and devices laid out, in-slab conduit drawn before the pour, and panel schedules and one-lines updated to the approved equipment.

  • Conduit and cable tray layouts
  • In-slab conduit plans
  • Device and fixture plans

What you receive

A drawing set ready for your submittal.

Drafted in AutoCAD and Revit, with anything the contract drawings leave open listed for your RFIs.

  • 01

    PDF set for submittal

  • 02

    Native DWG or RVT files

  • 03

    Imperial or metric units

Drawing set

What the set includes.

The sheets in a typical set of electrical shop drawings. The exact list follows your contract drawings and specification section.

  • Conduit and cable tray layoutsFeeder and branch routing, tray sizes and elevations.
  • In-slab conduit plansConduit embedded in slabs, drawn ahead of each pour.
  • Device and fixture plansReceptacles, switches, fixtures and equipment connections.
  • Electrical room layoutsSwitchgear, panels and transformers, with working clearances.
  • Panel schedules and one-line diagramsUpdated to the approved equipment and circuits.
  • Support layoutsHangers and supports for tray and conduit racks.

Method

How we prepare electrical shop drawings.

01

Equipment sizes come from the approved product data, so room layouts match what will be installed.

02

Working clearances around equipment are shown from the code the drawings reference.

03

Routing is coordinated with duct, piping and structure, and clashes are listed as questions.

04

Fixture locations are coordinated with the reflected ceiling plan.

Standards

The references your reviewer expects.

We draft to the standards your contract drawings and specification cite. These are the ones we see most often for this trade.

NFPA 70, the National Electrical Code

The US electrical code, as adopted where the project is.

CSA C22.1, the Canadian Electrical Code

The Canadian equivalent, as adopted by each province.

Deliverables

What every set includes.

  • PDF drawing set, ready for your submittal
  • Native files: DWG from AutoCAD or RVT from Revit
  • A list of open questions and conflicts, for you to raise as RFIs
  • Revisions to the reviewer's comments, recorded in the title block
  • Imperial or metric units, to match the contract drawings
  • Drafted in AutoCAD and Revit

Who it is for

  • Electrical contractors
  • Low-voltage contractors
  • Design-build MEP firms
  • General contractors

Questions contractors ask us

Can you draw in-slab conduit before the pour?

Yes. Embedded conduit plans can be issued for each pour, ahead of the rest of the set.

Do you update panel schedules?

Yes. Panel schedules and one-line diagrams can be updated to the approved equipment and circuits.

Do you estimate electrical too?

Yes. Our electrical estimating measures power and lighting quantities from the same drawings.

Are the shop drawings stamped?

Shop drawings are submittals: the architect or engineer of record reviews and approves them. If your project needs a professional engineer's stamp, for example on delegated design, tell us at the quote stage and we will confirm what can be arranged for that project.

How are shop drawings priced?

We review the contract drawings and the specification section, then confirm the fee and the delivery date before any drafting starts.

Electrical shop drawings

Submittal due soon? Send the contract set.

Send the contract drawings, the specification section and the submittal date, and we will quote the electrical shop drawings.