Shop drawings · CSI Division 21
Fire sprinkler layouts, drafted for your designer.
Sprinkler shop drawings for fire protection contractors, with heads laid out, mains, branch lines and hangers drafted, the hydraulic calculations run, and the set prepared for your designer to review and submit.
- Sprinkler layout plans
- Riser and standpipe details
- Hanger and bracing layouts
What you receive
A drawing set ready for your submittal.
Drafted in AutoCAD and Revit, with anything the contract drawings leave open listed for your RFIs.
- 01
PDF set for submittal
- 02
Native DWG or RVT files
- 03
Imperial or metric units
Drawing set
What the set includes.
The sheets in a typical set of fire sprinkler shop drawings. The exact list follows your contract drawings and specification section.
Sheet
What it shows
- Sprinkler layout plansHead locations and types, coverage areas, and branch line and main routing.
- Riser and standpipe detailsRiser, valve, test and drain assemblies.
- Hanger and bracing layoutsHanger and seismic bracing locations along the piping.
- Hydraulic calculationsCalculations to NFPA 13 for the design area, from the water supply data for the site.
- SectionsPiping through tight ceiling spaces and around structure.
- Material listsPipe, fittings, heads and hangers by size and type.
Method
How we prepare fire sprinkler shop drawings.
Head locations are coordinated with the reflected ceiling plan, lights and diffusers.
Pipe routing is checked against duct, structure and other piping.
Hydraulic calculations are run to NFPA 13 from the water supply data you send, such as a recent flow test.
The signature or seal your jurisdiction requires stays with your licensed fire protection designer.
On renovations, existing heads to remain, remove or relocate are shown.
Standards
The references your reviewer expects.
We draft to the standards your contract drawings and specification cite. These are the ones we see most often for this trade.
NFPA 13
Installation of sprinkler systems, including what working plans must show.
NFPA 13 in Canada
Referenced by the National Building Code of Canada and the provincial codes.
Deliverables
What every set includes.
- PDF drawing set, ready for your submittal
- Native files: DWG from AutoCAD or RVT from Revit
- A list of open questions and conflicts, for you to raise as RFIs
- Revisions to the reviewer's comments, recorded in the title block
- Imperial or metric units, to match the contract drawings
- Drafted in AutoCAD and Revit
Who it is for
- Fire protection contractors
- Fire sprinkler designers
- Mechanical contractors
- General contractors
Related
Shop drawings for the trades next to yours.
Questions contractors ask us
Who signs or seals the working plans?
Do you do the hydraulic calculations?
Can you coordinate heads with the ceiling?
Do you show existing heads on renovations?
Are the shop drawings stamped?
How are shop drawings priced?
Fire Sprinkler shop drawings
Submittal due soon? Send the contract set.
Send the contract drawings, the specification section and the submittal date, and we will quote the fire sprinkler shop drawings.
