Shop drawings · CSI Division 03
Rebar placing drawings and bar lists.
Rebar shop drawings for reinforcing steel fabricators and placing contractors, with every bar marked, scheduled and located, so the shop can cut and bend and the crew can place.
- Placing drawings
- Bar lists
- Bending schedules
What you receive
A drawing set ready for your submittal.
Drafted in AutoCAD and Revit, with anything the contract drawings leave open listed for your RFIs.
- 01
PDF set for submittal
- 02
Native DWG or RVT files
- 03
Imperial or metric units
Drawing set
What the set includes.
The sheets in a typical set of rebar shop drawings. The exact list follows your contract drawings and specification section.
Sheet
What it shows
- Placing drawingsPlans, elevations and sections for footings, walls, slabs, beams and columns, with every bar mark located.
- Bar listsEach bar mark with its size, quantity, length, shape and weight, grouped by element.
- Bending schedulesBend types and dimensions for every bent bar, in the standard shapes fabricators use.
- Lap and splice schedulesLap lengths, mechanical splices and dowel extensions, from the structural notes.
- Release by pourBar lists split by pour, so steel is released in the order it is placed.
- Accessory listsChairs, bolsters and supports for placing.
Method
How we prepare rebar shop drawings.
Bar marks are unique within the job and appear on both the placing drawing and the bar list, so the field can match one to the other.
Cover, spacing and lap lengths come from the general structural notes and are noted on each drawing.
Conflicts between the structural and architectural drawings, such as wall thickness or slab depressions, are listed as questions for the engineer.
Openings, sleeves and embeds from other trades are located, so bars can be placed around them.
Standards
The references your reviewer expects.
We draft to the standards your contract drawings and specification cite. These are the ones we see most often for this trade.
ACI 318 and the ACI Detailing Manual (SP-66)
Hooks, bends, cover and lap lengths on US projects.
CRSI Manual of Standard Practice
Bar marks, bend types and bar list format on US projects.
CSA A23.1 and A23.3, and the RSIC Manual of Standard Practice
The Canadian equivalents, with metric bar sizes from 10M to 55M.
Deliverables
What every set includes.
- PDF drawing set, ready for your submittal
- Native files: DWG from AutoCAD or RVT from Revit
- A list of open questions and conflicts, for you to raise as RFIs
- Revisions to the reviewer's comments, recorded in the title block
- Imperial or metric units, to match the contract drawings
- Drafted in AutoCAD and Revit
Who it is for
- Rebar fabricators
- Reinforcing steel placers
- Concrete contractors
- General contractors self-performing concrete
Related
Shop drawings for the trades next to yours.
Questions contractors ask us
Do you prepare bar lists as well as placing drawings?
Can you detail in metric for Canadian projects?
Can you also take off rebar for the bid?
Are the shop drawings stamped?
How are shop drawings priced?
Rebar shop drawings
Submittal due soon? Send the contract set.
Send the contract drawings, the specification section and the submittal date, and we will quote the rebar shop drawings.
