Guide · Shop drawings

What are shop drawings, and how do they differ from design drawings?

Shop drawings show how a subcontractor or fabricator will make and install part of the work. They are a submittal, reviewed by the architect or engineer before anything is fabricated. Here is how they differ from design drawings, who prepares and reviews them, and what each trade's set includes.

  • Shop, design and as-built drawings compared
  • Who prepares, who reviews, who is responsible
  • What a set includes for nine trades

Written by

Navtej, Chief Estimator

B.Sc. in Civil Engineering, Master's in Quantity Surveying. Runs the estimating department at E 4 Estimators.

  • 01

    Published October 26, 2026

  • 02

    Updated October 29, 2026

  • 03

    4 min read

01

The short answer

Shop drawings are drawings prepared by a contractor, subcontractor, fabricator or supplier to show exactly how part of the work will be fabricated and installed: sizes, quantities, connections, materials and how it fits the work around it.

They are a submittal. The specification lists which shop drawings are required, the general contractor checks and forwards them, and the architect or engineer of record reviews them against the design before fabrication starts.

02

Shop drawings, design drawings and as-built drawings

Design drawings, also called contract or construction drawings, show what is to be built. Shop drawings show how one part of it will be made. As-built drawings record what was actually built.

Prepared byDesign drawingsThe architect and engineers of recordShop drawingsThe subcontractor, fabricator or supplier, or a drafter working for themAs-built drawingsThe contractor, from the field record
PurposeDesign drawingsShow what is to be built and the design intentShop drawingsShow how a specific part will be made and installedAs-built drawingsShow what was actually built
DetailDesign drawingsTypical details, design sizes and performance requirementsShop drawingsEvery piece, dimension, connection and product needed to fabricateAs-built drawingsChanges, final locations and routing
WhenDesign drawingsBefore biddingShop drawingsAfter award, before fabricationAs-built drawingsAt closeout
Design responsibilityDesign drawingsThe architect and engineers of recordShop drawingsStays with the design team, except for delegated designAs-built drawingsNot a design document

We prepare as-built drawings as well as shop drawings.

03

Who prepares them, and who reviews them

The requirement starts in the specification. Section 01 33 00, Submittal Procedures, sets out how submittals are made, and each trade's section lists the shop drawings it needs.

  • The subcontractor or fabricator prepares the drawings from the contract documents, the approved product data and, where needed, field dimensions.
  • The general contractor reviews them for coordination with other trades and site conditions, then submits them.
  • The architect or engineer reviews them for general conformance with the design. Typical review actions are no exceptions taken, make corrections noted, revise and resubmit, or rejected.
  • Fabrication starts once the drawings come back approved, so review time sits on the schedule for long-lead items such as steel and curtain wall.

Review does not move the design to the subcontractor, and under most contracts it does not relieve the subcontractor of responsibility for errors in its own drawings. The exception is delegated design, where the specification asks the subcontractor to engage a licensed engineer to design part of the work, such as some stairs and railings, curtain wall anchorage or cold-formed metal framing. Those submittals carry that engineer's calculations and seal.

04

What a set includes, trade by trade

RebarWhat the set showsPlacing drawings with bar marks, sizes, spacing, laps and splices, plus bar lists and bending schedulesCommon referenceACI Detailing Manual (SP-66) and the CRSI Manual of Standard Practice
Structural steelWhat the set showsErection drawings with piece marks, and piece drawings with every hole, cut and connectionCommon referenceAISC 303, Code of Standard Practice for Steel Buildings and Bridges
Miscellaneous metalsWhat the set showsStairs, railings, lintels, embeds and ladders, with dimensions, finishes and anchorageCommon referenceThe project specification, and the NAAMM manuals for metal stairs and railings
CMU masonryWhat the set showsWall elevations with coursing, openings, bond beams, grouted cells and reinforcingCommon referenceTMS 402/602, the masonry code and specification
Millwork and caseworkWhat the set showsElevations, sections, materials, hardware and installation detailsCommon referenceArchitectural Woodwork Standards (AWI, AWMAC and WI)
HVAC ductworkWhat the set showsDuct layouts with sizes, fittings, gauges and elevations, coordinated with the structureCommon referenceSMACNA HVAC Duct Construction Standards
Fire sprinklerWhat the set showsHead layout, pipe sizes and routing, hangers and riser detailsCommon referenceNFPA 13
TileWhat the set showsLayout, joint locations, transitions, movement joints and setting detailsCommon referenceANSI A108 and the TCNA Handbook
Curtain wall and storefrontWhat the set showsElevations, mullion profiles, anchors, glazing and perimeter detailsCommon referenceThe manufacturer's system data, with delegated design where the specification calls for it

Every trade we draw is listed on our shop drawings page.

05

Why shop drawings matter to cost and schedule

  • They are where clashes get caught. A duct that hits a beam is cheap to fix on a drawing and expensive to fix in the ceiling.
  • Fabrication waits on approval, so a set returned for resubmittal delays everything behind it.
  • Questions the contract drawings leave open come out while drawing, and go to the design team as RFIs before the work is built.
  • The quantities in the shop drawings should agree with the quantities in the bid. When the team that took off the bid also draws the work, both start from the same measured set.

06

What to send to have shop drawings prepared

  • The contract drawings and any addenda
  • The specification section for the trade
  • Approved product data and any answered RFIs
  • Field dimensions, where the work must fit existing construction
  • The submittal date

We confirm the sheets, the fee and the delivery date before drafting starts. Send the contract set for a quote.

About the author

Navtej, Chief Estimator

B.Sc. in Civil Engineering, Master's in Quantity Surveying. Runs the estimating department, sets the standards every estimate is checked against and reviews high-stakes bids.

Meet the team

Questions contractors ask

Who is responsible for shop drawings?

The contractor or subcontractor who will build the work prepares them and is responsible for their accuracy. The architect or engineer of record reviews them for conformance with the design.

Do shop drawings need an engineer's stamp?

Only when the specification calls for delegated design or local rules require it. Most shop drawings are reviewed by the engineer of record rather than sealed by a separate engineer. If your project needs a stamp, tell us at the quote stage and we will confirm what can be arranged.

Are shop drawings the same as submittals?

Shop drawings are one kind of submittal. Others include product data, samples, calculations and certificates.

What is the difference between shop drawings and as-built drawings?

Shop drawings are prepared before fabrication to show how the work will be built. As-built drawings are prepared at the end to record what was actually built.

Keep reading

Where this guide leads.

The services and sample estimates behind this guide, and the guides that pair with it.

Next bid

Bid due soon? Send the drawings.

Send the drawings, the scope and the bid date. We reply with a quote within 30 minutes during business hours.